Please or Register to create posts and topics.

Unusual behaviour, which I have not experienced before.

Gestern war ich mal wieder auf großer Tour von Deutschland aus nach Kroatien. Dabei habe ich ein sehr ungewöhnliches Verhalten der App mehrfach gehabt. Zuerst einfach mal das Ziel eingegeben, natürlich läuft da die Berechnung problemlos und gestartet. Nach einigen Kilometern, die 1. Umleitung im Münchner Raum. Diese gefahren und Scenic wollte mich zum Start der Umleitung zurück navigieren und rechnete 42 km obendrauf. Gut das ich mich ein wenig auskenne und kurz vor dem Chiemsee wieder eine Umleitung. Tja was soll ich sagen, Scenic möchte das ich nach München zurück fahren wieder auf der Route zu sein. Mittlerweile sind aus den ursprünglichen 842km fast 1000 geworden. Gut das ich die Strecke einigermaßen vorher schon kannte, denn Scenic will unbedingt an die Stelle der 1. Umleitung zurück. Also Bluetooth am Helm aus, bevor es nervt und Neustart der zieleingabe beim nächsten tankstopp. Gesagt getan… kurz vor golling in Österreich wieder eine Umleitung und was macht Scenic, die App will mich wiederum Start der Umleitung navigieren, natürlich wurden die km dazu gerechnet, gut war mir wieder Wurst, Bluetooth wieder aus und der Straßenbeschilderung gen Villach gefolgt. Beim nächsten tankstopp wieder erneut Scenic gestoppt und erbaut das Ziel eingegeben. Um kurz nach Villach wieder eine Umleitung und Scenic machte wieder das gleiche Spiel. Am wurzenpass nochmals scenic das Ziel vorgegeben und was passierte? Natürlich um Ljubljana ein abweichen der Route wegen einer Umleitung und die Misere begann wieder, Scenic will unbedingt wieder nach. Ljubljana und navigierte es wollte und ich war schon 30km vor der kroatischen Grenze, dank meinem eingebauten navi im Kopf, auch Hirn genannt. Ein letztes Mal gab ich Scenic die Chance mich ans Ziel zu bringen und startete erneut eine Tour vom startbildschirm zum Ziel, dann oh Wunder keine Umleitungen und Scenic machte endlich das, wozu es da ist ohne irgendwelche zicken. Ich habe es geschafft und bin in der Nähe von Zadar angekommen. Was lief da falsch?

 

 

Yesterday I was again on a big tour from Germany to Croatia. I had a very unusual behaviour of the app several times. First, just enter the destination, of course the calculation runs smoothly and started. After a few kilometres, the 1. Redirection in the Munich area. This drove and Scenic wanted to navigate me back to the start of the diversion and calculated 42 km on top. Good that I know a little about it and a detour again just before Lake Chiemsee. Well, what can I say, Scenic would like me to drive back to Munich to be back on the road. Meanwhile, the original 842km have become almost 1000. Good that I already knew the track somewhat before, because Scenic really wants to take the place of the 1. Redirection back. So Bluetooth on the helmet off before it's annoying and restarting the destination entry at the next refuelling stop. Said and done... shortly before Golling in Austria again a diversion and what does Scenic do, the app wants to navigate me again start of the diversion, of course the km were added, well I was s… again, Bluetooth off again and followed the road signs to Villach. At the next refuelling stop again Scenic stopped again and built the destination entered. Shortly after Villach again a diversion and Scenic made the same game again. At the wurzenpass again scenic the goal given and what happened? Of course, around Ljubljana a deviation of the route due to a diversion and the misery began again, Scenic desperately wants to follow again. Ljubljana and sailed it wanted and I was already 30km before the Croatian border, thanks to my built-in navi in the head, also called brain. One last time I gave Scenic the chance to bring me to the destination and started another tour from the start screen to the destination, then oh wonder no diversions and Scenic finally did what it is there for without any mistakes. I made it and arrived near Zadar. What went wrong?

There seems to be a bug, where sometimes, upon a recalculation, Scenic wants to send you back to the start point. I will have a look at this at part of the big update. Meanwhile, if that happens again, use the 'Skip next Via/Stop' button, and Scenic should guide you normally again after that:

theigi has reacted to this post.
theigi
If you're enjoying Scenic and are happy with the support, please leave a nice rating in the App Store. It would mean a lot to me ❤️

Even if there is no via or stop? I only entered the destination address.

Hi Theigi.

Tried this by myself actually. Your right. There is just the destination on the list.

When you try to skip next via, it tells you: There is no via or stop to skip.

Spooky. In my opinion it should create a list, depending on the options you set like curvy or fast, it dosent.

For a long trip like this i recomnent to use the power-planer instead of just setting the destination.

Have a nice trip and return save.

Regards, Mex

theigi has reacted to this post.
theigi

Hmm, don't generate an extra list.... As with any normal navigation device, the route to the destination should simply be recalculated if you deviate from the proposed route. Of course, options such as avoiding highways should be retained. It could also be that you simply want to make a detour away from the proposed route and it cannot be that you are led back to the beginning of your original route. In Scenic2 this never happened to me and in version 3 I just noticed it yesterday, because I just had the destination in mind and I didn't really care about the way, whether I turn left or right, or spontaneously drive differently. Normally I plan quite carefully, but not yesterday, because the danger of storms and violent showers was given, I also had to be able to decide spontaneously, only road closures and diversions came before me.

 

 

Hmm, keine extra Liste generieren…. Es sollte wie bei jedem normalen Navigationsgerät, einfach die Route zum Ziel neu berechnet werden, wenn man von der vorgeschlagenen Route abweicht. Natürlich sollten Optionen, wie Autobahn vermeiden, erhalten bleiben. Es könnte ja auch sein, das man einfach abseits der vorgeschlagenen Route nen Abstecher machen möchte und da kann es nicht sein, das man zum Anfang seiner ursprünglichen Route zurückgeführt wird. In Scenic2 ist mir das nie passiert und in Version 3 ist mir das eben gestern aufgefallen, da ich einfach nur das Ziel vor Augen hatte und mir der Weg recht egal war, ob ich mal links oder rechts abbiege, oder spontan anders fahre. Normal plane ich recht genau vor, nur eben gestern nicht, da die Gefahr auf Sturm und heftige Schauer gegeben war, musste ich auch spontan entscheiden können, nur kamen mir strassensperrungen und Umleitungen zuvor.